1.1.1 Equipment needs to maintain and check on time. Do preparation and handover work of the production every day,in order to let the protection device to keep in good condition, it is strictly prohibited to work in bad condition. When in work, all kinds of security device need to keep in correct and effective condition, as to abnormal phenomenon, it should discover in time, disposal in time, ensure personal safety.
1.1.2 Equipment maintenance and check only be allowed when in downtime. Such as: clean machine or its spare parts and replace of lubricating oil etc. if you have to climb up the machine or hand into it to do above work, it will be mandatory provision: the power must be cut off , the switch must be locked.
1.1.3 The working ability, body condition and emotions of the staff should be attentted.Any dangerous for production safety,personal safety, such as excessive fatigue, attention lax, etc., should be transferred from the post. Employee should put forward his/her own discomfort timely.
1.2 anti-explosion1.2.1 If there is hard material enter into cutter, congest and partially block, cut the lower flash point material, or blade break accident, it will cause material explosion or fire, motor will automatic alarming with overload protection ,then feeding will stop . You must be (monthly) check regularly, ensure electrical devices, equipment work normally. Once fault,you must stop working, to repair or replace parts, no permission for short receiving, make alarm failure.
1.2.2 There is no fire and smoking in food, grain,feed and chemical industry factory,it also need to use electric welding machine and electric tools for repairation and installation, work should be arranged in special workshop. When in work, you must be equipped with fire equipment and water, the staffs forbid to smoke.